 | ULR-IN-16F-HO-COB-WT | - :: LED: COB Dotless Technology
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 1-1/8 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 290-340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| |  SPEC |
 | ULR-IN-16F-YHO-40K | - :: LED: SMD2835 chip spaced 1/3” on center, 39 LED per foot, 0.17 watts eachchip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 2.5 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 6.7 watts per foot
- :: Lumens: 914 lumens per foot, 24 LM per LED
- :: CRI: 80
- :: Max run: 14’
- :: 120º beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 maleplug for connection to next ribbon (Prewired)
- :: Operating temperature: -4°F - 104°F
- :: IP20
- :: 5-year warranty
| | BRCH |
| ULR-IN-16F-YHO-27K | - :: LED: SMD2835 chip spaced 1/3” on center, 39 LED per foot, 0.17 watts eachchip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 2.5 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 6.7 watts per foot
- :: Lumens: 914 lumens per foot, 24 LM per LED
- :: CRI: 80
- :: Max run: 14’
- :: 120º beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 maleplug for connection to next ribbon (Prewired)
- :: Operating temperature: -4°F - 104°F
- :: IP20
- :: 5-year warranty
| | BRCH |
| ULR-IN-16F-YHO-50K | - :: LED: SMD2835 chip spaced 1/3” on center, 39 LED per foot, 0.17 watts eachchip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 2.5 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 6.7 watts per foot
- :: Lumens: 914 lumens per foot, 24 LM per LED
- :: CRI: 80
- :: Max run: 14’
- :: 120º beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 maleplug for connection to next ribbon (Prewired)
- :: Operating temperature: -4°F - 104°F
- :: IP20
- :: 5-year warranty
| | BRCH |
| ULR-IN-16F-YHO-30K | - :: LED: SMD2835 chip spaced 1/3” on center, 39 LED per foot, 0.17 watts eachchip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 2.5 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 6.7 watts per foot
- :: Lumens: 914 lumens per foot, 24 LM per LED
- :: CRI: 80
- :: Max run: 14’
- :: 120º beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 maleplug for connection to next ribbon (Prewired)
- :: Operating temperature: -4°F - 104°F
- :: IP20
- :: 5-year warranty
| | BRCH |
 | ULR-OT-16F-HO-RGBW | - :: LED: SMD5050RGBW chip spaced 5/8" on center, 19 per foot, 0.31 watts each
- :: Dimmable using a magnetic driver
- :: With RGBW controller controls all functions
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED RGBW driver required)
- :: 24V ribbons have longer run capability compared to 12V.
- :: Power: 5.8 watts per foot, 95 watts per 16.4 foot roll
- :: Roll length: 16 feet-5 inches
- :: Lumens: 225 lumens per foot, 11.9 lumens per LED, 3690 lumens per roll
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: Includes (connected 1 female ribbon-to-power supply connector) and 1 male plug for connection to next ribbon
- :: 5-year warranty
| | BRCH SPEC |
 | ULR-IN-16F-HO-RGBW | - :: LED: SMD5050RGBW chip spaced 5/8" on center, 19 per foot, 0.31 watts each
- :: Dimmable using a magnetic driver
- :: With RGBW controller controls all functions
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED RGBW driver required)
- :: 24V ribbons have longer run capability compared to 12V.
- :: Power: 5.8 watts per foot, 95 watts per 16.4 foot roll
- :: Roll length: 16 feet-5 inches
- :: Lumens: 225 lumens per foot, 11.9 lumens per LED, 3690 lumens per roll
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: Includes (connected 1 female ribbon-to-power supply connector) and 1 male plug for connection to next ribbon
- :: 5-year warranty
| | SPEC BRCH |
| ULR-IN-16F-HO-COB-27K | - :: LED: COB480 Dotless Technology
- :: Length: 16.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 146
- :: CCT: 2700K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 290LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | BRCH SPEC |
 | ULR-OT-98F-HO-COB-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 3W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 96~113LM/W per ft.
- :: Cutting increment: Every 1-1/8 inches
- :: 3M double sided tape (9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED Type: COB
- :: Total Lumens: 290~340LM per ft.
- :: Color Temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120°
| | SPEC INST |
 | ULR-IN-16F-HO-27K-BK | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20LIGHTING SPECIFICATIONS
- ::: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | ULR-IN-16F-XHO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC BRCH |
 | ULR-IN-16F-SO-27K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
 | ULR-IN-16F-HO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | ULR-OT-16F-HO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 4 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.24 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | R24V-5M-D3-P54-CW | - :: Material: silicon copper membrane
- :: LED: SMD3528 chip spaced 5/8” on center,19 per foot, .08 wa s each chip
- :: Dimmable using a magnetic driver
- :: Cu ing increment: can be cut every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 wa s per foot, 25 wa s per 16.4-foot roll
- :: Roll lengths: 16 feet-5 inches & 98 feet-5 inches
- :: Lumens: 90 lumens per foot, 4.73 lumens perLED, 1475 lumens per roll; 180 lumens per foot,4.73 lumens per LED
- :: CRI: 80
- :: Max run: 80’
- :: 120o beam angle
- :: Includes (connected 1 female ribbon-to-powersupply connector) and 1 male plug for connection to next ribbon
| | |
| ULR-IP54-16F-HO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Operating temperature: -4°F - 104°F
- :: IP rating: IP54
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-OT-16F-XHO-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 5.8W per ft.
- :: Max Run: 16.4ft.
- :: Efficacy: 70~77LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 2 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot, 0.16 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 440~450LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-HO-COB-30K | - :: LED: COB480 Dotless Technology
- :: Length: 16.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 150
- :: CCT: 3000K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | BRCH SPEC |
 | ULR-OT-98F-HO-COB-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 3W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 96~113LM/W per ft.
- :: Cutting increment: Every 1-1/8 inches
- :: 3M double sided tape (9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED Type: COB
- :: Total Lumens: 290~340LM per ft.
- :: Color Temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120°
| | SPEC INST |
 | ULR-IN-16F-HO-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-HO-30K-BK | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-XHO-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC BRCH |
 | ULR-IN-16F-SO-30K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
| ULR-OT-16F-HO-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 4 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.24 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IP54-16F-HO-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Operating temperature: -4°F - 104°F
- :: IP rating: IP54
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-OT-16F-XHO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 5.8W per ft.
- :: Max Run: 16.4ft.
- :: Efficacy: 70~77LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 2 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot, 0.16 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 440~450LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | R24V-5M-D3-P54-WW | - :: Material: silicon copper membrane
- :: LED: SMD3528 chip spaced 5/8” on center,19 per foot, .08 wa s each chip
- :: Dimmable using a magnetic driver
- :: Cu ing increment: can be cut every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 wa s per foot, 25 wa s per 16.4-foot roll
- :: Roll lengths: 16 feet-5 inches & 98 feet-5 inches
- :: Lumens: 90 lumens per foot, 4.73 lumens perLED, 1475 lumens per roll; 180 lumens per foot,4.73 lumens per LED
- :: CRI: 80
- :: Max run: 80’
- :: 120o beam angle
- :: Includes (connected 1 female ribbon-to-powersupply connector) and 1 male plug for connection to next ribbon
| | |
| ULR-IN-16F-HO-COB-40K | - :: LED: COB480 Dotless Technology
- :: Length: 16.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 146
- :: CCT: 4000K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 337LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | BRCH SPEC |
| ULR-OT-98F-HO-COB-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 3W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 96~113LM/W per ft.
- :: Cutting increment: Every 1-1/8 inches
- :: 3M double sided tape (9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED Type: COB
- :: Total Lumens: 290~340LM per ft.
- :: Color Temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120°
| | SPEC INST |
| ULR-IN-16F-HO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-HO-40K-BK | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-XHO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC BRCH |
 | ULR-IN-16F-SO-40K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
| ULR-OT-16F-HO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 4 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.24 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-OT-16F-XHO-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 5.8W per ft.
- :: Max Run: 16.4ft.
- :: Efficacy: 70~77LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 2 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot, 0.16 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 440~450LM per ft.
- :: Color temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IP54-16F-HO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Operating temperature: -4°F - 104°F
- :: IP rating: IP54
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-HO-COB-50K | - :: LED: COB480 Dotless Technology
- :: Length: 16.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 146
- :: CCT: 5000K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | BRCH SPEC |
| ULR-OT-98F-HO-COB-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 3W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 96~113LM/W per ft.
- :: Cutting increment: Every 1-1/8 inches
- :: 3M double sided tape (9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED Type: COB
- :: Total Lumens: 290~340LM per ft.
- :: Color Temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120°
| | SPEC INST |
 | ULR-IN-16F-HO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8" on center, 19 per foot, 0.23 watts each chip
- :: Total Lumens: 310~350LM per ft.
- :: Color Temperature: 4000K
- :: Color Rendering Index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-XHO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-HO-50K-BK | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | ULR-IN-16F-SO-50K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
| ULR-IP54-16F-HO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Operating temperature: -4°F - 104°F
- :: IP rating: IP54
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-OT-16F-HO-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 4 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.24 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-OT-49F-XHO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 5.8W per ft.
- :: Max Run: 16.4ft.
- :: Efficacy: 70~77LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 2 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.16 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 440~450LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-HO-COB-65K | - :: LED: COB480 Dotless Technology
- :: Length: 16.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 146
- :: CCT: 6500K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | BRCH SPEC |
| ULR-OT-98F-HO-COB-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 3W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 96~113LM/W per ft.
- :: Cutting increment: Every 1-1/8 inches
- :: 3M double sided tape (9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED Type: COB
- :: Total Lumens: 290~340LM per ft.
- :: Color Temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120°
| | SPEC INST |
 | ULR-IN-16F-HO-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape (9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-XHO-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-SO-27K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
| ULR-OT-49F-HO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 4 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-OT-49F-XHO-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 5.8W per ft.
- :: Max Run: 16.4ft.
- :: Efficacy: 70~77LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 2 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.16 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 440~450LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IP54-16F-HO-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Operating temperature: -4°F - 104°F
- :: IP rating: IP54
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-HO-COB-27K | - :: LED: COB480 Dotless Technology
- :: Length: 98.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 150
- :: CCT: 2700K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | BRCH SPEC |
| ULR-OT-98F-HO-COB-65K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 3W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 96~113LM/W per ft.
- :: Cutting increment: Every 1-1/8 inches
- :: 3M double sided tape (9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED Type: COB
- :: Total Lumens: 290~340LM per ft.
- :: Color Temperature: 6500K
- :: Color rendering index: 90
- :: Beam Angle: 120°
| | SPEC INST |
| ULR-IN-98F-XHO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC BRCH |
 | ULR-IN-98F-HO-27K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 2700K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | ULR-IN-98F-SO-30K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
| ULR-OT-49F-HO-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 4 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-OT-49F-XHO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 5.8W per ft.
- :: Max Run: 16.4ft.
- :: Efficacy: 70~77LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 2 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.16 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 440~450LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-HO-COB-30K | - :: LED: COB480 Dotless Technology
- :: Length: 98.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 150
- :: CCT: 3000K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | BRCH SPEC |
 | ULR-IN-98F-HO-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-XHO-30K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 3000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC BRCH |
 | ULR-IN-98F-SO-40K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
| ULR-OT-49F-HO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 4 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-OT-49F-XHO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 5.8W per ft.
- :: Max Run: 16.4ft.
- :: Efficacy: 70~77LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 2 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.16 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 440~450LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-HO-COB-40K | - :: LED: COB480 Dotless Technology
- :: Length: 98.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 150
- :: CCT: 4000K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC BRCH |
| ULR-IN-98F-HO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-XHO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | BRCH SPEC |
 | ULR-IN-98F-SO-50K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
| ULR-OT-49F-XHO-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 5.8W per ft.
- :: Max Run: 16.4ft.
- :: Efficacy: 70~77LM/W per ft.
- :: Material: silicon copper membrane
- :: Cutting increment: Every 2 inches
- :: Red 3M VHB double sided adhesive
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP67
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.16 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 440~450LM per ft.
- :: Color temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-HO-COB-50K | - :: LED: COB480 Dotless Technology
- :: Length: 98.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 150
- :: CCT: 5000K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC BRCH |
 | ULR-IN-98F-HO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-XHO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC BRCH |
| ULR-IN-98F-HO-COB-65K | - :: LED: COB480 Dotless Technology
- :: Length: 98.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 150
- :: CCT: 6500K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC BRCH |
 | ULR-IN-98F-HO-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 2700K/3000K/3500K/4000K/5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-XHO-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC BRCH |
