 | UCSENS-IR-1 | | | |
 | PCS-1 | - :: High-impact resistant polycarbonate material
- :: Mounting hardware provided for easy installation
| |  BRCH |
| WG-1 | - :: High-impact resistant chrome-plated steel
- :: Mounting hardware provided for easy installation
| | |
| WXR-1 | - :: Dimensions:1-gang: width 2-¾" height 4-½" depth 1"2-gang: width 4-9/16" height 4-½" depth 1"
- :: Material: die-cast aluminum with powder-coated finish
- :: Includes gasket and mounting hardwarePRODUCT FEATURES
- ::: Reinforced connector outlets
- :: Scratch resistant powder-coated finish
- :: Suitable for wet locations - NEMA 3R rated
- :: Connector outlets accept threaded fittings & conduit
- :: Retail-ready packaging (shrink-wrapped with barcode)
- :: Closure plugs, mounting lugs and ground screws included
| | |
| BG-1 | - :: High-impact resistant polycarbonate material
- :: Mounting hardware provided for easy installation
| | BRCH |
| BGR-1 | - :: High-impact resistant polycarbonate material
- :: Mounting hardware provided for easy installation
| | BRCH |
 | LF3-15NW-KN | - :: Housing: Die-cast aluminum housing with powder coat finish (Dark Bronze or White)
- :: lumileds lexeon 3030 high flux LED
- :: TIR optic lens - TYPE II
- :: Voltage: 120~277V; 60Hz AC
- :: Operating Temp:-4°F to 104°F
- :: Up to 110 lumens per wa
- :: CRI: 82~84
- :: Beam Angle: 104°
- :: 70,000 hour rated life
- :: 7-year warranty
- :: Suitable for Wet Locations, IP65
- :: Solid state lighting technology for long life, nomaintenance needed and high-efficiency
| | |
 | LF3-15WW-KN | - :: Housing: Die-cast aluminum housing with powder coat finish (Dark Bronze or White)
- :: lumileds lexeon 3030 high flux LED
- :: TIR optic lens - TYPE II
- :: Voltage: 120~277V; 60Hz AC
- :: Operating Temp:-4°F to 104°F
- :: Up to 110 lumens per wattage
- :: CRI: 82~84
- :: Beam Angle: 104°
- :: 70,000 hour rated life
- :: 7-year warranty
- :: Suitable for Wet Locations, IP65
- :: Solid state lighting technology for long life, nomaintenance needed and high-efficiency
| | |
 | LF3-WH-50CW-KN | - :: Housing: Die-cast aluminum housing with powder coat finish (Dark Bronze or White)
- :: lumileds lexeon 3030 high flux LED
- :: TIR optic lens - TYPE II
- :: Voltage: 120~277V; 60Hz AC
- :: Operating Temp:-4°F to 104°F
- :: Up to 110 lumens per wa
- :: CRI: 82~84
- :: Beam Angle: 104°
- :: 70,000 hour rated life
- :: 7-year warranty
- :: Suitable for Wet Locations, IP65
- :: Solid state lighting technology for long life, nomaintenance needed and high-efficiency
| | |
 | LF3-WH-50WW-KN | - :: Housing: Die-cast aluminum housing with powder coat finish (Dark Bronze or White)
- :: lumileds lexeon 3030 high flux LED
- :: TIR optic lens - TYPE II
- :: Voltage: 120~277V; 60Hz AC
- :: Operating Temp:-4°F to 104°F
- :: Up to 110 lumens per wa
- :: CRI: 82~84
- :: Beam Angle: 104°
- :: 70,000 hour rated life
- :: 7-year warranty
- :: Suitable for Wet Locations, IP65
- :: Solid state lighting technology for long life, nomaintenance needed and high-efficiency
| | |
 | LF3-30CW-KN | - :: Housing: Die-cast aluminum housing with powder coat finish (Dark Bronze or White)
- :: lumileds lexeon 3030 high flux LED
- :: TIR optic lens - TYPE II
- :: Voltage: 120~277V; 60Hz AC
- :: Operating Temp:-4°F to 104°F
- :: Up to 110 lumens per wattage
- :: CRI: 82~84
- :: Beam Angle: 104°
- :: 70,000 hour rated life
- :: 7-year warranty
- :: Suitable for Wet Locations, IP65
- :: Solid state lighting technology for long life, nomaintenance needed and high-efficiency
| | |
 | LF3-50CW-KN | - :: Housing: Die-cast aluminum housing with powder coat finish (Dark Bronze or White)
- :: lumileds lexeon 3030 high flux LED
- :: TIR optic lens - TYPE II
- :: Voltage: 120~277V; 60Hz AC
- :: Operating Temp:-4°F to 104°F
- :: Up to 110 lumens per wattage
- :: CRI: 82~84
- :: Beam Angle: 104°
- :: 70,000 hour rated life
- :: 7-year warranty
- :: Suitable for Wet Locations, IP65
- :: Solid state lighting technology for long life, nomaintenance needed and high-efficiency
| | |
 | LF3-50WW-KN | - :: Housing: Die-cast aluminum housing with powder coat finish (Dark Bronze or White)
- :: lumileds lexeon 3030 high flux LED
- :: TIR optic lens - TYPE II
- :: Voltage: 120~277V; 60Hz AC
- :: Operating Temp:-4°F to 104°F
- :: Up to 110 lumens per wa
- :: CRI: 82~84
- :: Beam Angle: 104°
- :: 70,000 hour rated life
- :: 7-year warranty
- :: Suitable for Wet Locations, IP65
- :: Solid state lighting technology for long life, nomaintenance needed and high-efficiency
| | |
 | LF3-WH-15CW-KN | - :: Housing: Die-cast aluminum housing with powder coat finish (Dark Bronze or White)
- :: lumileds lexeon 3030 high flux LED
- :: TIR optic lens - TYPE II
- :: Voltage: 120~277V; 60Hz AC
- :: Operating Temp:-4°F to 104°F
- :: Up to 110 lumens per wa
- :: CRI: 82~84
- :: Beam Angle: 104°
- :: 70,000 hour rated life
- :: 7-year warranty
- :: Suitable for Wet Locations, IP65
- :: Solid state lighting technology for long life, nomaintenance needed and high-efficiency
| | |
 | ICF4SJBB | - :: ETL Type IC Rated, complies with the requirements of the Standard(s) for Metallic Outlet Boxes (UL-514A) and are identified with the ETL Listed Mark
- :: ETL Listed for 2-Hour Fire Resistance to Meet and Exceed Strict Fire UL 263 Safety Code
- :: ETL ASTM E283/E283M-19 Air Tight certified
- :: Trims and Inserts Sold Separately
- :: Integrated Non-Combustible Insulation Acts As a Sound Barrier Minimizing Sound Transfer Between Floors
- :: Rated for Direct Contact With IC Insulation
- :: Light Fixtures Sold Separately
| | |
 | LEDDR-24V-60W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 18-25V
- :: Output Current: 2.5A Max
- :: Output Power: 60W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 0.62A@120VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac
- :: Power Efficiency: 87% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | XTU-RG-EM | - :: 120V/277V AC Dual Voltage Operation
- :: Sign Wattage: 1W
- :: Input Power: 2.90-3.79W
- :: AC Charging Current: 32mA
- :: Fully Automatic Solid-State, Two Rate Charger Initiates Battery Charging to Recharge a Discharged Battery in 24 Hours
- :: Built-In 1.2V1000mAh Nickel Cadmium Battery for Minimum 90 Minutes Emergency Operation
- :: Injection-Molded Thermoplastic ABS Housing and Polycarbonate Cover, UL 94V-0 Flame Rating
- :: Red & Green Lenses are Included. The Default is Red
- :: To Change Color of the Sign Change the Lens & Flip the Color Switch Inside
- :: Single or Double Face (Universal)
- :: Letters 6" Height with 3/4" Stroke
- :: Operating Temperature: 68º F~104ºF
- :: Maximum 24 Hours for Full Recharge Time
- :: Universal J-Box Mounting Pattern
- :: Injection-Molded Thermoplastic ABS Housing and Polycarbonate Cover, UL 94V-0 Flame Rating
- :: Innovative, Easy Installation in Minutes
- :: IP20, Indoor Use Only
- :: Color Temperature: 1001K
- :: 8 (AC)/ 272 (DC) LM
- :: Ultra Bright LEDs
| | SPEC INST |
 | SCX-2FT-20W-MCT4-D-IND | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 20W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: Lens Type: Opal Polycarbonate Lens
- :: Lens Snaps into Housing
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 2197LM/2316LM/2348LM/2390LM
- :: Color Temperatures: 3000K/3500K/4000K/5000K
- :: Multi-CCT(Selectable with Switch Inside the Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: 5-Year Warranty
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | ULR-IN-16F-HO-COB-27K | - :: LED: COB480 Dotless Technology
- :: Length: 16.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 146
- :: CCT: 2700K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 290LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | BRCH SPEC |
 | ULR-IN-HWDR-75W | - :: Input voltage: 85-264VAC, 50/60Hz
- :: AC Input Current: 100mA max
- :: Output power: 75W
- :: Output Current: 0~3.2A
- :: Output DC Voltage: 24V
- :: Setup, Rise time: 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
- :: Hold up time: 60ms/230VAC 12ms/115VAC at full load
- :: Leakage Current: <0.75mA / 240VAC
- :: No Load power consumption<0.3W
- :: LED indicator for power on
- :: operating temperature: -22°F to 158°F
- :: Cooling by free air convection
- :: 100% full load burn-in test
- :: Withstand 5G vibration test
- :: Over voltage category III Safety Standards: UL60950-1, TUV EN60950-1, EN60335-1, EN61558-1 2 16 .1, BSMI CNS14336-1, EAC TP TC 004, AS/NZS 60950.1(by CB) approved
- :: Withstand Voltage: I/P-O/P:4KVAC, I/P-FG:2KVAC, O/P-FG:1.25KVAC
- :: Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH
- :: EMC Emission: Compliance to EN55032 (CISPR32) Class B, EN55014, EN61000-3-2,-3, GB/T 9254, BSMI CNS13438, EAC TP TC 020
| | SPEC |
 | IGL-1W-30K | - :: Stainless Steel Cover/Aluminum Housing/SS Housing/PVC Sleeve
- :: LED: COB Technology (Dimmable)
- :: Lens: Glass
- :: Wattage: 1W
- :: Lumens: 100LM
- :: Voltage: 12V AC/DC
- :: Beam Angle: 45°
- :: Color Temp: 3000K Warm White
- :: 1-year warranty
- :: IP Rating: IP67, Wet Location
| | SPEC |
 | HL2R-ICAT | - :: Four remodel clips secure the housing and accommodate 1/2” and 5/8” ceiling materials.
- :: Single-wall painted steel housing with gasket for IC-rated airtight installation in insulated ceilings
- :: Airtight to prevent heated airflow diffusion
- :: IC-rated; can be directly installed on ceiling insulation
- :: 7-Year Warranty
- :: Listed for through-branch circuit wiring
- :: Contains nine 8-3/5” knockouts and four Romex pry-outs with strain relief
- :: Ground wire provided in J-box
- :: Three quick connectors provided on J-Box
- :: UL listed for damp location.
- :: UL listed for Air Tight construction
| | SPEC INST |
 | LEDDR-24V-96W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 18-25V
- :: Output Current: 4x4A Max
- :: Output Power: 96W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 3.9A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | XTU-CL-RG-EM | - :: 120V/277V AC Dual Voltage Operation
- :: Light Head Wattage: 2.4W Per Head
- :: Sign Wattage: 3.5W
- :: Input Power: 2.90-3.79W
- :: AC Charging Current: 32mA
- :: Fully Automatic Solid-State, Two Rate Charger Initiates Battery Charging to Recharge a Discharged Battery in 24 Hours
- :: Built-in 3.6V 1200mAh Ni-Mh Battery for Minimum 90 Minutes Emergency Operation
- :: Injection-Molded Thermoplastic ABS Housing and Polycarbonate Cover, UL 94V-0 Flame Rating
- :: Red & Green Lenses are Included. The Default is Red
- :: To Change Color of the Sign Change the Lens & Flip the Color Switch Inside
- :: Single or Double Face (Universal)
- :: Letters 6" Height with 3/4" Stroke
- :: Operating Temperature: 32ºF~104ºF
- :: Maximum 24 Hours for Full Recharge Time
- :: Universal J-Box Mounting Pattern
- :: Injection-Molded Thermoplastic ABS Housing and Polycarbonate Cover, UL 94V-0 Flame Rating
- :: Innovative, Easy Installation in Minutes
- :: IP20, Indoor Use Only
- :: Color Temperature: 6132K
- :: Total Lumens: 8 (AC)/ 272 (
| | SPEC |
 | XTU-RG-EM-BK | - :: 120V/277V AC Dual Voltage Operation
- :: Sign Wattage: 1W
- :: Input Power: 2.90-3.79W
- :: AC Charging Current: 32mA
- :: Fully Automatic Solid-State, Twi Rate Charger Initiates Battery Charging to Recharge a Discharged Battery in 24 Hours
- :: Built-In 1.2V1000mAh Nickel Cadmium Battery for Minimum 9 Minutes Emergency Operation
- :: Injection-Molded Thermoplastic ABS Housing and Polycarbonate Cover, UL 94V-0 Flame Rating
- :: Red & Green Lenses are Included. The Default is Red
- :: To Change Color of the Sign Change the Lens & Flip the Color Switch Inside
- :: Single or Double Fac (Universal)
- :: Letters 6" Height with 3/4" Stroke
- :: Operating Temperature: 68º F~104ºF
- :: Maximum 4 Hours for Full Recharge Time
- :: Universal J-Box Mounting Pattern
- :: Injection-Molded Thermoplastic ABS Housing and Polycarbonate Cover, UL 94V-0 Flame Rating
- :: Innovative, Easy Installation in Minutes
- :: IP20, Indoor Use Only
- :: Color Temperature: 1001K
- :: 8 (AC)/ 272 (DC) LM
- :: Ultra Bright LEDs
| | SPEC INST |
 | ULR-IN-16F-SO-30K | - :: LED: SMD2216 chip spaced 5/8" on center, 19 per foot, 0.08 watts each chip
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 1.5 watts per foot
- :: Lumens: 100 lumens per foot, 4.73 LM per LED
- :: CRI: 90
- :: Max run: 32'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | SPEC |
| IGL-1W-40K | - :: Stainless Steel Cover/Aluminum Housing/SS Housing/PVC Sleeve
- :: LED: COB Technology (Dimmable)
- :: Lens: Glass
- :: Wattage: 1W
- :: Lumens: 100LM
- :: Voltage: 12V AC/DC
- :: Beam Angle: 45°
- :: Color Temp: 4000K Natural White
- :: 1-year warranty
- :: IP Rating: IP67, Wet Location
| | SPEC |
 | LFE-KN | - :: MCT: Multi Color Temperature (Switch On The Back of Fixture With Silicon Cover)
- :: Cord type: 18” SJTW 18/3 AWG cable
- :: Die-Cast Aluminum Housing With Powder Coat Finish (Dark Bronze Finish)
- :: High Conductive Aluminum LED Board
- :: Voltage: 120V AC 50/60Hz
- :: Color rendering index: CRI > 70
- :: Power Factor: >0.9
- :: Operating Temp: -40°F to 104°F
- :: Up to 150 lumens per watt
- :: 70,000 hour rated life
- :: Suitable for Wet Locations, IP65
- :: 7-year warranty
| | |
 | SCL-4CS10 | - :: Adj. 10ft. 1/16in Quad Cable Suspension Canopy Kit, Keyhole Connectors (No Cord Incl.)
| | INST SPEC |
| LEDDR-24V-120W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 18-25V
- :: Output Current: 5A Max
- :: Output Power: 120W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 1.3A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac /25A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | DAB-SOL-PA3-1 | - :: 3 Inches Pole-Top Adapter For 1 Solar Bell-Light Arm + Solar Engine Mast
| | SPEC INST |
 | ULR-IP54-16F-HO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Operating temperature: -4°F - 104°F
- :: IP rating: IP54
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-16F-HO-COB-50K | - :: LED: COB480 Dotless Technology
- :: Length: 16.4FT
- :: Width: 0.39IN
- :: LEDs/Ft: 146
- :: CCT: 5000K
- :: Dimmable using a magnetic driver
- :: Cutting increment: Every 4 inches
- :: Working voltage: 24V DC (LED driver required)
- :: Power: 3 watts per foot
- :: Lumens: 340LM/FT
- :: CRI: 90
- :: Max run: 20'
- :: 120° beam angle
- :: 3M double sided tape is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP20
- :: 5-year warranty
| | BRCH SPEC |
 | ULR-IN-16F-XHO-40K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 4000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | DAB-SOL-PA4-1 | - :: 4 Inches Pole-Top Adapter For 1 Solar Bell-Light Arm + Solar Engine Mast
| | SPEC INST |
| SCX-8FT-80W-MCT4-D-IND | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 80W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Efficacy: 110 LPW
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: Lens Type: Opal Polycarbonate Lens
- :: Lens Snaps into Housing
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 8800LM
- :: Color Temperatures: 3000K/3500K/4000K/5000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: Up Light Option Available
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | HL4R-ICAT | - :: Four remodel clips secure the housing and accommodate 1/2” and 5/8” ceiling materials.
- :: Single-wall painted steel housing with gasket for IC-ratedairtight installation in insulated ceilings
- :: Airtight to prevent heated airflow diffusion
- :: IC-rated; can be directly installed on ceiling insulation
- :: 7-Year Warranty
- :: Listed for through-branch circuit wiring
- :: Contains nine 8-3/5” knockouts and four Romex pry-outswith strain relief
- :: Ground wire provided in J-box
- :: Three quick connectors provided on J-Box
- :: UL listed for damp location.
- :: UL listed for Air Tight construction
- :: ETLus
| | SPEC INST |
 | SCX-8FT-80W-MCT-D-IDL | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 80W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: LPW: 110
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: IP Rating: IP54
- :: Operating Temperature: -13°F~104°F
- :: Suspended, Requires Suspension Cables (Not Included) See Page 2
- :: Power Cord comes out through the Suspension Hole on the End of the Fixture from the Top
- :: 5-Year Warranty
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 8800LM
- :: Color Temperatures: 3000K/3500K/4000K
- :: Multi-CCT(Selectable Switch Inside Fixture)
- :: Color Rendering Index: CRI ≥ 80
- :: 50,000 Hours Rated Life
- :: Beam Angle: 104.8°(H) x 100.5°(V)
| | |
 | SCX-IC-MCT4 | - :: Lumens: 629LM/726LM/787LM/854LM
- :: Color Temperature: 3000K/3500K/4000K/5000K
- :: Ambient Temperature: -13°F~104°F
- :: Dimmable: 0~10V dimmable
- :: CRI:>80
- :: Power Factor:>0.95
- :: Efficacy: 110LM/W
- :: IP Rating: IP54
- :: Life Span: 50,000 hours
- :: Housing: White, Aluminum
- :: Lens: Frosted Polycarbonate
| | |
IN%20Resized.jpg%3Falt%3Dmedia&w=3840&q=75&dpl=dpl_AXJ87LyLZEwCSeS7fFVkokWDcN5y) | SCX4-IP66-JUMP-6IN | - :: SCX4-IP66 6in Ac Jump Cable With Male And Female Wet Loc. Connector
| | SPEC |
 | ULR-IN-HWDR-350W | - :: Output power: 350W
- :: Output Current: 0~29A
- :: Output DC Voltage: 24V
- :: Setup, Rise time: 1300ms, 50ms/230VAC 1300ms, 50ms/115VAC at full load
- :: Hold up time: 16ms/230VAC 12ms/115VAC at full load
- :: Leakage Current: <2mA / 240VAC
- :: Efficiency: 83.5%
- :: LED indicator for power on
- :: No load power consumption < 0.75W
- :: AC input range selected by switch
- :: Operating temperature: up to 158°F
- :: Protections: Short circuit, Overload, Over voltage, Over Temperature
- :: Force air cooling by built-in DC fan
- :: Built –in cooling fan NO-OFF control
- :: Withstand 5G vibration test
- :: 100% full load burn-in-test
- :: Safety Standards: IEC/UL 62368-1, BSMI CNS14336-1, EAC TP TC 004,KC K60950-1 (for LRS-350-12/24 only) approved
- :: Withstand Voltage: I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
- :: Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
- :: EMC Emission: Compliance to BSMI CNS13438, EAC TP TC 020,KC KN32 KN35
| | SPEC |
 | ULR-IN-16F-HO-50K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape (9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector (Prewired) and 1 male plug for connection to next ribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot, 0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 5000K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
 | DAB-SOL-PA5-1 | - :: 5 Inches Pole-Top Adapter For 1 Solar Bell-Light Arm + Solar Engine Mast
| | INST SPEC |
 | SCXT-8FT-40-80W-MCTP-D-FL | - :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: Custom Colors Available
- :: Lens Snaps into Housing
- :: Mounting Options: Surface, Suspended, Recessed
- :: IP Rating: IP54
- :: Two 6.6 FT (2 Meters) Lead Cables Are Provided. Each Powers Half Of The Fixture. Position The Driver Box Near The Fixture’s Center for the two cables to reach it. If you Need To Install The Driver Box Closer To One End, You Must Order An Extension Cable And RJ11 Coupling For The Cable From The Far End To Reach The Driver Box And Plug Into It
- :: Each Fixture Comes With a 6-1/2” Pre-Installed Cable With Male RJ11 Connector Plugs Right Into The Driver
- :: External Driver Needed. Calculate The Total Wattage And Pick Adequate Driver(s) As Power Supply. Each Driver Has 4 Ports For 4 Separate Fixtures.
- :: Do Not Exceed The Maximum Wattage Of The Driver
- :: Order The SCXT-TGRID-SP1 To Install The Driver On Top Of a T-Bar. Or Install The Driver On a Joist
| | |
| LEDDR-24V-288W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 24V DC ± 0.5V DC
- :: Output Current: 3x4A Max
- :: Output Power: 288W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 3.2A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac /25A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
| XTU-RG-BK-2C-277V | - :: 277V AC Dual Voltage Operation
- :: Sign Wattage: 1W
- :: Input Power: 2.90-3.79W
- :: AC Charging Current: 32mA
- :: Dual Circuit Operation (277V): Enables independent control of two circuits operating exclusively on 277V AC power, providing enhanced reliability and operational flexibility. Designed for applications requiring a primary and secondary power source or independent management of distinct lighting zones
- :: Injection-Molded Thermoplastic ABS Housing AndPolycarbonate Cover, UL 94V-0 Flame Rating
- :: Red & Green Lenses Are Included. The Default Is Red
- :: To Change Color Of The Sign Change The Lens & Flip The Color Switch Inside
- :: Single Or Double Face (Universal)
- :: Letters 6” height with 3/4” stroke
- :: Operating Temperature: 68º F~104ºF
- :: Universal J-box mounting Pattern
- :: Injection-Molded thermoplastic ABS Housing And Polycarbonate Cover, UL 94V-0 Flame Rating
- :: Innovative, Easy Installation in Minutes
- :: IP20, Indoor Use Only
- :: Color Temperature: 1001K
- :: Total Lumens
| | SPEC INST |
 | ULR-IN-HWDR-450W | - :: Output power: 450W
- :: Output Current: 0~18.8A
- :: Output DC Voltage: 24V
- :: Setup, Rise time: 1500ms, 50ms/230VAC 1500ms, 50ms/115VAC at full load
- :: Hold up time: 16ms/230VAC 12ms/115VAC at full load
- :: Leakage Current: <2.5mA / 240VAC
- :: Efficiency: 86%
- :: LED indicator for power on
- :: AC input active surge current limiting
- :: AC input range selected by switch
- :: Operating temperature: up to 158°F
- :: Protections: Short circuit, Overload, Over voltage, Over Temperature
- :: Force air cooling by built-in DC ball bearing fan
- :: Built-in remote sense function
- :: Safety Standards: IEC/UL 62368-1, BSMI CNS14336-1, EAC TP TC 004,KC K60950-1 (for LRS-350-12/24 only) approved
- :: Withstand Voltage: I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
- :: Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
- :: EMC Emission: Compliance to BSMI CNS13438, EAC TP TC 020,KC KN32 KN35
| | SPEC |
 | DAB-PA2-1 | - :: DAB 2in Pole Adapter For 1 Bell Arm, Black
| | INST SPEC |
| LEDDR-24V-384W-UNIV | - :: Voltage: 120-277V
- :: Output Voltage: 24V DC
- :: Output Voltage Range: 24V DC ± 0.5V DC
- :: Output Current: 4x4A Max
- :: Output Power: 384W
- :: Output Ripple & Noise: ≤600mV
- :: Input Voltage Range: 100V AC - 277V AC
- :: Input Frequency Range: 50-60HZ
- :: Input Current: 3.2A@110VAC
- :: Surge Current (Cold Start): 20A, 50%, 1.6ms @120Vac /25A, 50%, 1.4ms @277Vac
- :: Power Efficiency: 85% @ 220V AC
- :: PF: 0.95
- :: Leakage Current: <0.75mA
- :: Short-Circuit Protection: Hiccup Mode, and AutomaticRecovery
- :: Over-Voltage Protection: Shut Down the Output WhenNon-Load Voltage is ≥28V, and Automatic Recovery
- :: Working Temperature: -22°F to 140°F
- :: Working Humidity: 20%-90%RH
- :: Approved Environments Location: Suitable for Dry,Damp, and Wet locations
- :: Storage Temperature: -40°F to 176°F
- :: Storage Humidity: 10% - 95%RH
- :: Vibration: 10~500Hz, 1.0mm, 15 minutes(for X,Y, ZEach Axis)
- :: Tcase: 194°F
| | SPEC INST |
 | SCXT-L2FT-20-40W-MCTP-D-FL | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 20W/30W/40W
- :: Power Factor: >0.95
- :: Total Harmonic Distortion: ≤ 20 %
- :: Efficacy: 110 LM/W
- :: Low Profile Modern Design
- :: Aluminum Housing With Matte White Finish
- :: Custom Colors Available
- :: Lens Snaps into Housing
- :: Mounting Options: Surface, Suspended, Recessed
- :: IP Rating: IP54
- :: Each Fixture Comes With a 6-1/2” Pre-Installed Cable With Male RJ11 Connector Plugs Right Into The Driver
- :: External Driver needed. Calculate the total wattage and pick adequate driver(s) as power supply. each driver has 4 ports for 4 separate fixtures.
- :: Do not exceed the maximum wattage of the driver
- :: Order The SCXT-TGRID-SP1 To Install The Driver On Top Of a T-Bar. Or Install The Driver On a Joist
- :: Operating Temperature: -13°F~104°F
- :: Dimmable: 0~10V Dimming
- :: Total Lumens: 2200M/3300LM/4400LM
- :: Color Temperatures: 3000K/3500K/4000K
- :: Multi-CCT and Power (Selectable with Switch Inside the Fixture)
- :: Color Rendering Index: CRI ≥ 80
| | |
 | ULR-IN-98F-HO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 4.4W per ft.
- :: Max Run: 20ft.
- :: Efficacy: 75~79LM/W per ft.
- :: Cutting increment: Every 4 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 5/8” on center, 19 per foot,0.23wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 310~350LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | SPEC |
| ULR-IN-98F-XHO-35K | - :: Voltage: 24VDC (LED driver required)
- :: Wattage: 8.8W per ft.
- :: Max Run: 11ft.
- :: Efficacy: 70~79LM/W per ft.
- :: Cutting increment: Every 2 inches
- :: 3M double sided tape(9474LE) is preinstalled
- :: Includes 1 female ribbon-to-power supply connector(Prewired) and 1 male plug for connection to nextribbon (Prewired)
- :: IP rating: IP20
- :: Dimming: Dimmable using a magnetic driver
- :: LED: SMD2835 chip spaced 1/3” on center, 37 per foot,0.23 wats each chip
- :: LED Type: SMD2835
- :: Total lumens: 620~700LM per ft.
- :: Color temperature: 3500K
- :: Color rendering index: 90
- :: Beam Angle: 120º
| | BRCH SPEC |
 | DAB-PA3-1 | - :: DAB 3in Pole Adapter For 1 Bell Arm, Black
| | INST SPEC |
 | SCX6-IC-MCTP | - :: Dimmable: 0~10V dimmable
- :: CRI:>80
- :: Power Factor:>0.95
- :: Efficacy
- :: 110LM/W
- :: IP Rating
- :: IP54
- :: Life Span
- :: 50,000 hours
- :: Housing
- :: White, Aluminum
- :: Frosted Polycarbonate
- :: Lumens: 1050-2100LM
- :: Color Temperature: 3000K/3500K/4000K/5000K
| | |
 | IGL-1W-TRM-AL-RBK | - :: Trims for 1W In-Ground Fixtures
| | |
 | DAB-PA4-1 | - :: DAB 4in Pole Adapter For 1 Bell Arm, Black
| | INST SPEC |
 | ELB-2048-IP65 | | | |
 | IGL-1W-TRM-AL-SCP | - :: Trims for 1W In-Ground Fixtures
| | |
| SCL-GSY20 | - :: Strip line cover
- :: White finish
- :: Housing: Steel base with powder coating
- :: Lens: Frosted diffuse PC lens
- :: Ceiling-mounted
- :: Voltage: 120~277V AC, 50/60Hz
- :: Dimmable 0~10V
- :: CRI: >80
- :: IP Rating: IP20
- :: Mounting: Surface mount, wall mount or suspended
- :: 5 years warranty
| | SPEC |
 | SCL-GSY120 | - :: Adj. 20ft. 1/16in. Single Suspension Cable with Y Hook Ends, Loop Grip-Per on Top
| | SPEC |
 | SCL-WRCL-14 | - :: 1/4in. Galvanized Malleable Iron Wire Rope Clip
| | SPEC |
 RESIZED.jpg?alt=media)
 1 RESIZED.jpg?alt=media)
 1 RESIZED.jpg?alt=media)
