Documents

BRCH

BROCHURES

SPEC

SPEC SHEET

UCM-150L-24DC 150W 24VDC Magnetic Dimmable LED Driver

:: Type: Magnetic phase-cut dimmable driver, two-section bobbin (separated primary and secondary windings)
:: Input Voltage: 120V 60Hz
:: Max Input Current at Full Load: 1.5A
:: Output Voltage: 24VDC (25.3VDC no load / 23.5VDC fully loaded)
:: Max Total Wattage: 150W
:: Max Output Current: 6.2A
:: Efficiency: 88%
:: Dimming: Compatible with MLV, ELV, and CL low-voltage dimmers
:: Enclosure: Black powder-coated steel, NEMA 3R rated
:: Location Rating: Suitable for Wet Locations, outdoor rated
:: Temperature Class: B (130°C)
:: Leads Maximum Operating Temperature: 105°C
:: Input Leads: 18AWG 600V
:: Output Leads: 12AWG 300V
:: Protection: Manual-reset primary breaker 2A; secondary breaker 10A
:: Enclosure Temperature: Does not exceed 75°C at 45°C ambient, fully loaded
:: Wiring Compartment: 6 knockouts for 3/8-inch screw cable connectors
:: Weight: 8 lbs
:: Dimensions: 5-inch x 4-1/8-inch x 4-inch (per hotsheet; see FLAGS)
:: Certifications: ETL Listed; UL STD. 2108; CSA C22.2 No. 250.0

:: The UCM-150L-24DC powers large 24-volt LED installations with smooth magnetic dimming and dependable outdoor-rated construction, ideal for long exterior ribbon runs, landscape and architectural lighting, and hard-wired projects needing higher output with minimal voltage drop. Its larger NEMA 3R housing and two-section bobbin carry heavier loads. In the 24V range, this 150W model steps well above the compact 20W to 60W drivers and shares the high-capacity housing with the 300W UCM-300L-24DC.

No questions posted yet for this product!