Documents

SPEC

SPEC SHEET

WEC-ANT-8A Low Voltage Microwave Bi-Level Sensor, 12-24VDC, 360°, Daylight Harvesting, DIP Switch and Remote Programmable

:: Sensor Type: Microwave motion, 5.8GHz ±75MHz, with daylight sensor
:: Mounting: Fixture or surface mount with screw tabs; wire leads to LED driver (no plug-in base)
:: Mounting Height: 8' to 12' (12' MAX.)
:: Detection: 360°, 26' (8m) MAX. radius
:: Input: 12-24VDC
:: Dimming: 0-10V, 25mA MAX. sinking current
:: Light Levels: 100% occupied; 0%, 10%, 30%, or 50% standby; off
:: Hold Time: 10 seconds, 1 minute, 5 minutes, or 15 minutes
:: Standby Time: 1 minute, 30 minutes, 60 minutes, or continuous
:: Daylight Threshold: 10, 30, or 50 lux, or disabled
:: Sensitivity: 20%, 50%, 75%, or 100%
:: Programming: Onboard DIP switches or optional RC-100 IR remote (50' range indoors)
:: RF Output: <0.2mW
:: Housing: White
:: Dimensions: 94.5mm (3.72") (L) x 29.5mm (1.16") (W) x 30.6mm (1.20") (H) incl. antenna
:: Humidity: 95% RH MAX.
:: Operating Temp: -40°F to 158°F

:: The Westgate WEC-ANT-8A adds bi-level occupancy and daylight control to 0-10V dimmable LED fixtures, using a 5.8GHz microwave sensor that detects motion in a 360° pattern up to a 26' radius at mounting heights of 8' to 12'. Lights run at 100% when the space is occupied, dim to a selectable 0%, 10%, 30%, or 50% standby level after the hold time, and turn off after the standby period, while the built-in daylight sensor keeps lights off when natural light is sufficient. Its compact housing mounts in or alongside the fixture with screw tabs and wires directly to the driver. It is ideal for offices, restrooms, stairwells, corridors, storage rooms, and parking areas, and settings are adjusted with onboard DIP switches or the optional RC-100 IR remote.

No questions posted yet for this product!